VS20WAVE Maxi Dual Vertical Gel Electrophoresis Tank: High-Resolution Separation for Sequential Workflows
The VS20WAVE Maxi Dual Vertical Gel Electrophoresis Tank provides the extended separation distance needed to resolve complex protein mixtures and closely migrating nucleic acids. Standard mini-gel formats often lack the run length required for challenging proteomic separations, leading to band compression and ambiguous results. Designed for laboratories running sequential batches, this 20 x 20 cm system lets you cast gels directly within the running insert using the supplied casting base, creating a dependable, self-contained setup that delivers sharp band definition across long migration paths.
Vertical screw-clamp technology within the PAGE insert uses just four screws to lock glass plates securely in place, cutting down assembly time compared to traditional multi-clamp systems. This vertical clamping spreads torque evenly along the side gaskets to eliminate glass bowing and prevent buffer leakage into the outer chamber. Combined with an internal cooling coil that connects directly to a laboratory chiller or tap water supply, the unit controls Joule heating effectively during high-voltage runs, ensuring sample bands migrate straight across all lanes.
Need continuous gel casting while running? If your laboratory handles high sample numbers and you want to pour your next gels on the benchtop while a separation is already running inside the tank, explore the VS20WAVE Maxi System with External Casting Upstand (G9-0247) to eliminate bench downtime.
Key Benefits:
- Four-Screw Clamping: Fast, effortless assembly. The ergonomic PAGE insert uses only four vertical screws to lock plates firmly, avoiding the tedious setup routines required by conventional multi-screw maxi systems.
- Uniform Pressure Distribution: Prevents leaks and plate bowing. Vertical clamping spreads mechanical force symmetrically along the sealing edges, maintaining an impermeable seal without pinching or distorting the gel matrix.
- Integrated Thermal Management: Stops smile effects. The detachable cooling coil circulates chilled water directly through the buffer reservoir, dissipating Joule heat to keep bands crisp during high-voltage runs.
- Bonded Glass Spacers: Guaranteed parallel alignment. Factory-bonded 1 mm spacers keep plates aligned accurately, preventing spacer movement during assembly and stopping sample leakage along the edges.
- Sequential Casting Setup: Practical all-in-one preparation. Clamping the running insert directly into the dual casting base provides a leak-free seal on silicone mats, ideal for laboratories that prepare and run gels in sequential succession.
Technical Insights
Symmetrical Lateral Sealing and Glass Protection
In large-format gel systems, uneven clamping pressure often causes glass corners to chip or inner buffer seals to fail. The VS20WAVE distributes mechanical torque through four vertical pressure bars that act evenly along the vertical edges of the cassette. This creates a uniform seal against the upper buffer gasket, protecting expensive notched glass plates while preventing voltage leaks across the running chamber.
Workflow Contrast: In-Insert Sequential Casting
In this standard configuration (G9-0243), the PAGE running insert doubles as the casting frame. Glass plates are mounted into the insert, which is then clamped into the casting base against soft silicone mats for pouring. Once polymerisation is complete, the entire insert lifts directly into the outer tank for electrophoresis. This design keeps the hardware footprint compact and suits labs running structured, sequential batches where casting happens immediately prior to electrophoresis.
Specifications
- Catalogue Number: G9-0243
- Supplier Reference: VS20WAVESYS
- Plate Dimensions: 20 x 20 cm
- Active Gel Dimensions: 16 x 17.5 cm (W x H)
- Gel Capacity: Up to 2 gels standard (up to 4 gels using optional notched spacer plates)
- Supplied Throughput: 48 samples (2 x 24-sample combs included)
- Maximum Throughput: Up to 192 samples (using optional high-density combs)
- Spacer Thickness: 1.0 mm (bonded)
- Well Volume: 40 µl (with supplied 24-sample combs)
- Inner Buffer Reservoir Volume: 640 ml
- Total Buffer Reservoir Volume: 5.3 L (with cooling coil fitted)
- Unit Dimensions (W x D x H): 30 x 18 x 27 cm
- Weight: 2.5 kg
- Included Hardware: Maxi tank, lid with power cables, PAGE insert, cooling coil, dummy plate, dual casting base, 2 sets of glass plates with 1 mm bonded spacers, plus 2 x 24-sample combs
- Safety Features: Polarised safety lid with shrouded electrical connectors
- Certification: CE marked

